|
|
|
#1
11-14-2013, 03:42 AM
|
|||
|
|||
New Guy
Marty from NC.
My main reason for subscribing is to learn a few things for a project I have undertook. My wife and I have a wonderful piece of land in the NC mountains. Instead of building a cabin we purchased a 1972 Airstream Argosy that needed a lot of work. We gutted the inside and finished it with wood building our cabin at home and towing it to the mountains. Now I need to address a few of the outside metal issues. Nothing to detailed but I wanted to do it right and learn a few tips from the forum.
__________________
Marty 
|
|
#3
11-14-2013, 11:37 AM
|
|||
|
|||
|
Hi Marty welcome to the forum
Peter
__________________
P.Tommasini Metalshaping tools and dvds www.handbuilt.net.au Metalshaping clip on youtube http://www.youtube.com/watch?v=WEAh91hodPg Making Monaro Quarter panel: http://www.youtube.com/watch?v=KIpOhz0uGRM
|
|
#4
11-14-2013, 02:30 PM
|
||||
|
||||
|
Welcome Marty you will find lots of info from friendly people here.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#5
11-14-2013, 05:47 PM
|
|||
|
|||
|
Hello Marty, welcome to allmetalshaping.
David
__________________
Metalshaping DVD. www.metalshapingzone.com Metalshaping with hand tools on youtube http://www.youtube.com/watch?v=IGElSHzm0q8 All things are possible.
|
 |
|
|
Linear Mode
