|
|
|
#1
09-21-2015, 10:14 AM
|
|||
|
|||
Hello from London!!
Hi
This is really hard as I'm more of a lurker than a poster 😟 My name is Dan, I'm trying to learn new metal working skills to add to some flair to the stuff I try to make  The main thing I have been building up to is a drag racing pickup and I would like the metal work be up to a reasonable standard.I've been learning how to tig weld and that's going reasonably well so I will also make the tanks up. Cheers Dan
__________________
Cheers Dan 
|
|
#2
09-21-2015, 11:45 AM
|
||||
|
||||
|
Hello Dan and welcome to the forum.
Jere
__________________
Jere Kirkpatrick Valley Forge & Welding HEN-ROB Torch Dealer.  Teaching The Fundamentals of Metal Shaping www.jerekirkpatrick.com All tools are a hammer except the chisel.....That's a screwdriver.
|
|
#4
09-21-2015, 04:14 PM
|
||||
|
||||
|
Hi Dan, welcome to the forum, post up some photos so we can see what your at. No pressure.
__________________
Tom Poulter Follow the Dream - Sideways - - But don't fall-off the edge'good to know you guys care' https://ctrestorations.com/
|
|
#5
09-22-2015, 01:03 AM
|
|||
|
|||
|
Hi and welcome Dan. I recently built a motorised bead roller from some Tom Verity plans. I was able to do all of the machining in house, but quite a bit of it can be done without access to a mill if need be. There is a build thread here.
http://allmetalshaping.com/showthread.php?t=12894 So far I'm very pleased with it, but I'm pretty new to this. Lots of other simpler builds on here too.
__________________
Richard "I know nothing. I from Barcelona" (Manuel - Fawlty Towers) Link to our racecar project https://www.facebook.com/pages/Elan-...ab=public&view
|
 |
|
|
Linear Mode
