All MetalShaping

All MetalShaping (https://allmetalshaping.com/index.php)
-   Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)
-   -   Another Australian Car nut (https://allmetalshaping.com/showthread.php?t=7251)

garvice 10-31-2012 04:05 AM

Another Australian Car nut
 
Hey guys/girls,

Joined metal shaping to get a few more pointers from the artists on here.

I recently bought David Gardiner's DVD on metal shaping and it gave me the confidence to cut up my old datsun and have a go. I was actually surprised how easy it was. Please don't take that the wrong way, I am by no means great at it, however it was far from the stratosphere of work that I used to think body work was.

Below is a couple of posts of my work thus far, I still have a long way to go, but these were my first attempts.
http://www.the510realm.com/viewtopic...=24424#p203132
http://www.the510realm.com/viewtopic...=24424#p203133
http://www.the510realm.com/viewtopic...=24424#p203134
http://www.the510realm.com/viewtopic...=24424#p204199
http://www.the510realm.com/viewtopic...art=15#p204716

Still using a mig at this stage, but one day I might get around to buying an oxy set.

HEATNBEAT 10-31-2012 09:35 AM

Hi Bradley and welcome!:)
Looks like you're getting a good start. The panels look nice!

David Gardiner 10-31-2012 02:50 PM

HI Bradley, Welcome to the site. I am glad my DVD gave you the confidence to start and some insite into making repair sections.

David

thingsthatfly2 10-31-2012 02:52 PM

sweet car. fun project!

Peter Tommasini 10-31-2012 07:48 PM

HI Bradley welcome to the forum
Peter

garvice 11-01-2012 04:44 AM

Thanks guys,
I am looking forward to learning more.


All times are GMT -5. The time now is 08:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.