All MetalShaping - New member in San Diego

All MetalShaping (https://allmetalshaping.com/index.php)

- Introductions (https://allmetalshaping.com/forumdisplay.php?f=7)

- - New member in San Diego (https://allmetalshaping.com/showthread.php?t=12059)

Mouldingman

08-05-2014 10:32 AM

New member in San Diego

Hi all,
I reshaped front fender of my 70 GTO with hammer and dollys, then welded up the holes from a "Helpful neighbor with a screw in slide hammer).
I used a flux core MIG welder and finished the pitting with lead.
Now I need to work out some small bulges between the old "bullet holes".

RockHillWill

08-05-2014 10:35 AM

Welcome to the forum Jim.

David Gardiner

08-05-2014 05:10 PM

Welcome to allmetalshaping Jim.

David

Peter Tommasini

08-05-2014 06:00 PM

Hi Jim welcome to the forum
Peter

All times are GMT -5. The time now is 03:49 PM.